0

OEM/ODM TitaniumV Hex nut Suppliers

Home / Products / DIY Industrial Mechanical Fasteners / TitaniumV Hex nut
TitaniumV Hex nut

TitaniumV Hex nut

The TitaniumV Hex Nut is a high-performance mechanical fastener engineered from Grade 5 (Ti-6Al-4V) titanium alloy, designed for critical fastening applications where weight reduction and corrosion resistance are technical requirements. This hexagonal fastener conforms to international dimensional standards, including DIN 934 and ISO 4032, ensuring compatibility with standard metric and imperial threading systems. Its internal threading is precision-machined to reach 6H or 4H tolerance classes, minimizing thread galling and ensuring consistent clamp load distribution. Due to its specific metallurgical properties, the TitaniumV Hex Nut maintains structural integrity under extreme thermal cycling and exposure to chloride-rich environments, making it a functional alternative to stainless steel or alloy steel components in high-stress assemblies.
Inquiry Now Shopping Now
  • TitaniumV Hex nut
PREV：Hex nut
NEXT：Titanium washers, open-end washers
Ti-6Al-4V
Grade 5 Titanium

TitaniumV Hex Nut

4.51 g/cm3
895 MPa tensile
400°C max

The TitaniumV Hex Nut is a high-performance mechanical fastener engineered from Grade 5 (Ti-6Al-4V) titanium alloy, designed for critical fastening applications where weight reduction and corrosion resistance are technical requirements. This hexagonal fastener conforms to international dimensional standards, including DIN 934 and ISO 4032, ensuring compatibility with standard metric and imperial threading systems. Its internal threading is precision-machined to reach 6H or 4H tolerance classes, minimizing thread galling and ensuring consistent clamp load distribution. Due to its specific metallurgical properties, the TitaniumV Hex Nut maintains structural integrity under extreme thermal cycling and exposure to chloride-rich environments, making it a functional alternative to stainless steel or alloy steel components in high-stress assemblies.

core advantages
D01 -45 percent weight
Density Optimization
With a density of approximately 4.51 g/cm3, this titanium fastener provides a 45 percent weight reduction compared to steel counterparts while maintaining equivalent tensile strength.
D02 passive film
Oxidation Barrier
The material naturally forms a stable, protective oxide film upon exposure to air, providing innate resistance to saltwater, acids, and industrial chemicals without the need for additional plating or coating.
D03 paramagnetic
Non-Magnetic Property
The Ti-6Al-4V alloy is paramagnetic, preventing interference with sensitive electronic sensors or magnetic resonance equipment.
D04 -200°C to 400°C
Thermal Stability
The nut retains its mechanical properties at cryogenic temperatures and remains stable in elevated temperature environments up to 400°C.

Technical Product Features

Material Grade
Grade 5 Titanium (Ti-6Al-4V)
Standard Compliance
DIN 934 / ISO 4032 / ASME B18.2.2
Tensile Strength
Minimum 895 MPa (130 ksi)
Thread Class
6H / 2B Precision Machined
Surface Finish
Anodized, Polished, or Natural PVD

Primary Application Scenarios

AERO
Aerospace
Aerospace Engineering
Used in airframe structures and engine components to achieve mass targets without compromising safety margins.
MAR
Marine
Marine Industry
Applied in offshore oil platforms, desalination plants, and underwater robotics due to its immunity to seawater corrosion.
MED
Medical
Medical Technology
Suitable for laboratory diagnostic equipment and surgical robotics where non-magnetic and biocompatible materials are mandatory.
AUTO
Automotive
High-Performance Automotive
Integrated into suspension systems and exhaust assemblies for racing vehicles to reduce unsprung weight.
technical bulletin

Handling and Technical Guidance

01
Anti-Galling Measures
Due to the friction coefficient of titanium, it is recommended to use molybdenum disulfide or nickel-based anti-seize lubricants during installation to prevent thread cold-welding.
02
Torque Specifications
Follow precise torque-to-yield calculations. The lower modulus of elasticity in titanium (approx. 114 GPa) requires careful adjustment of tightening parameters compared to steel fasteners.
03
Storage Requirements
Maintain in a dry environment. Although corrosion-resistant, the nuts should be kept in original packaging to prevent surface contamination from free iron particles, which can cause galvanic reactions if embedded.
04
Tooling Compatibility
Use clean, non-ferrous or stainless steel sockets and wrenches to avoid cross-contamination of iron onto the titanium surface.
DIN 934 ISO 4032 ASME B18.2.2 AMS 4911 MIL-DTL-9047
TitaniumV is a registered trademark of Titanium Fastener Group · all specifications subject to engineering review

Related Products

Zhejiang Donghe Machinery Technology Co., Ltd.

 

Zhejiang Donghe Machinery Technology Co., Ltd. offer Wholesale TitaniumV Hex nut Manufacturers. Our company passed the ISO9001:2000 quality management certification system standard in 2017 and is an enterprise with self-operating import and export rights.
Our company produces various international industrial standard products, including Chinese GB standards, German DIN standards, American ANSI standards, British B standards, and so on. In addition, our company can customize various non-standard fasteners according to customer requirements. The products are exported to Europe, Australia, Africa, the United States, and other regions. We always provide customers with good product and technical support, and sound after-sales service.

News

Factory Show

Factory appearance
Intelligent packaging
Quenching furnace
Fastener supporting mold workshop​
Cold heading workshop
Pragmatic​
Innovation
Sincerity
Laboratory
Fully inspected products using optical sorting technology​
Office environment​
Enterprise Honorary Certificates​

Contact Us

Please complete the form below and one of our team will get back to you as soon as possible.