Chemical anchor bolts are high-performance fastening systems that use adhesive resin or mortar to bond the bolt securely into concrete, masonry, or stone substrates. Unlike mechanical expansion anchors, chemical anchors distribute load through adhesive bonding along the full embedment depth, delivering superior pull-out resistance and load capacity even in cracked concrete, dynamic loading, or seismic conditions. Available in carbon steel (grades 4.8, 8.8, 10.9), stainless steel (A2, A4), and hot-dip galvanized finishes, with diameters from M6 to M48 and custom lengths up to 600mm. The system includes threaded rod, resin capsules or injectable mortar, and installation accessories — all configurable to match your substrate type, load requirements, and environmental conditions.
Mechanical anchors rely on expansion forces against the concrete wall, which can lose holding capacity in cracked concrete. Chemical anchors use adhesive bonding to distribute load along the full embedment depth, providing superior pull-out resistance even in cracked substrates, with higher load capacities and better dynamic and seismic performance.
Curing time depends on resin type and ambient temperature. Polyester typically cures in 5–30 minutes, epoxy in 15–60 minutes, and vinylester in 10–45 minutes at 20°C. Lower temperatures require longer curing. Always consult the manufacturer's technical data sheet for specific curing schedules and full load cure times.
Yes — specially formulated epoxy and vinylester resins are available for wet and underwater installations. These systems displace water during injection and cure reliably in moist conditions. Standard polyester resins are not suitable for wet installations and should only be used in dry environments.
All parameters are customizable: material grade (carbon steel, stainless, HDG), diameter (M6–M48), length (50–600mm), thread type (metric, UNC, custom), resin type (polyester, epoxy, vinylester), capsule or injection system, and special coatings for aggressive environments.
Zhejiang Donghe Releases Video on DIN 912 and DIN 7991 Screws DIN 912 DIN 7991...
View MoreProduct VideoZhejiang Donghe Releases Video on Hex Head Drill Screws ADD39.6 ...
View MoreZhejiang Donghe Releases Video on DIY Small Packaging Zhejiang Don...
View MoreZhejiang Donghe Releases Video on Fastener Packing Process Zhejiang Donghe Mac...
View MoreA drone gimbal assembly passed every structural simulation and then failed its...
View MoreZhejiang Donghe Completes Orderly Shipment of Fastener Products Zhejiang Donghe...
View MorePlease complete the form below and one of our team will get back to you as soon as possible.